Pairing Instructions for the BTVR-1 and BTVR2 Only

Before you use your headset the first time, you must pair the unit with a Bluetooth enabled mobile phone.

Please refer to the following steps to set up the pairing:
1)    Ensure the headset is off.
2)    Press and hold the On/Off Pairing Button on the end of the unit for 4 seconds until you see the LED light flash blue and red alternately indicating the unit is in pairing mode.
3)    Following your phone's instruction guide, set your Bluetooth enabled phone into search mode  
4)    Your phone will find the headset and show the device name on the screen, select the device name and confirm to pairing.
5)    Enter PIN code as 0000 (4 zeros) and confirm to complete pairing.

NOTE:

• If the pairing is successful, the headset will connect to your phone automatically, you may need to confirm the inquiry.
• While the headset is paired with the phone and connected, the indication light will flash 2 times every 5 seconds. If it failed or did not connect to the phone, the blue indicator light will flash 1 time every 3 seconds.
• Once you pair the headset with one device or more, the Headset will automatically connect to the phone you last connected whenever you turn the headset on, but make sure your phone's Bluetooth function is active.
• The headset supports Bluetooth V2.1+EDR specifications.  The simplified pairing process will make paring your devices easy, if your mobile phone supports Bluetooth V2.1+EDR specifications, you just need to turn on both of them, and add a new Bluetooth device on your phone, the headset and your phone will find each other and connect automatically.
• The headset supports multi-point technology.  To connect the headset to a 2nd Bluetooth phone, please repeat the pairing operation steps above. When you are finished pairing, turn off the headset and turn on again, the headset will connect to both phones automatically.